TOCO STORAGE

Galvanized Pallet Racking to NZ ready for shipment

toco — Sat, 27 May 2017 02:59:22 +0000

Quality Galvanized Pallet Rack is ideal for outdoor use. We take care of every order even

it is small.

Metal Pallet, Plastic Pallet, Wood Pallet, Which one to choose?

toco — Tue, 28 Feb 2017 09:39:52 +0000

When comparing metal and wood pallets there is virtually no contest. Metal pallets were designed as an alternative to wood and plastic pallets to advance and solve problems with modern manufacturing methods. Business is a serious game, and profits and losses are determined according to the methods you presently use to operate your business.

Studies and comparisons have been made, and the results in every category are unanimously in favor of metal pallets. But don’t take our word for it. Compare for yourself the advantages of metal pallets over wood and plastic pallets. And you will decide, as many other companies have, to use metal pallets. We want to reduce your overhead and increase you profits.

	Metal	Wood	Plastic
Safety	Excellent • Seldom Breaks • Hard to Contaminate • Easy to Decontaminate	Poor • Causes Splinters • Breaks Easily • Nails Protrude • Will Contaminate Easily • Hard to Decontaminate	Good • Breaks Moderately • Will Contaminate Moderately • Fairly Easy to Decontaminate
Repair	Excellent	Good • Basically Inexpensive	Poor • Non-Existent at This Time
With ASRS Equipment	Excellent • Works Well with Conveyor Systems	Poor • Racks out of Square • Pieces Jam Moving Parts of High-Priced Equipment	Fair • Plastic Gets Chewed up by Chain Conveyors
Design Flexibility	Excellent • Easy to Make Different Sizes & Shapes	Good • Easy to Make Different Sizes & Shapes	Poor • Very Costly to Make • Dyes for New Models Normally Limited to Existing Models (Dyes)
Cleanliness	Excellent • Excellent for All Clean-Room Applications	Poor • Due to High Breakage, Hard-to-Keep Warehouses Clean of Splinters & Pieces of Wood, Harbor Bugs, Fungus, Spores, & Other Contaminates. Should Not Be Used in Clean-Room Situations.	Good • Good for Some Clean-Room Applications
Fire	Excellent • Gets Hot	Poor • Adds to Fire	Poor • Adds to Fire • Gives off Toxic Fumes
Climate	Excellent • Cold-No Change • Mild-No Change • Hot-Becomes Hot	Good • Cold-Stiffens • Mild-No Change • Hot-No Change	Poor • Cold-Becomes Brittle • Mild-No Change • Hot-Becomes Soft • Direct Sun-Loses Oil & Becomes Brittle

Large Wire Mesh Decking – High volumes exported Monthly

toco — Thu, 01 Dec 2016 12:11:58 +0000

TOCO Wire Mesh Decking is a strong point of product we supply for customers in American, European, Austrialia, etc.

We can dispatch up to 6-8 containers in one day maximumly. Big wire mesh decking is demanding more and more recently, which is the mature product we are making. Stable quality and good services keep customers always coming back.

Check with us for the best quote for wire mesh decking now!

Automatic welding machine for beams

toco — Thu, 18 Aug 2016 07:04:56 +0000

Recently, TOCO started to use welding machines for beams which guarantees the product quality in a stable way. In the past, all beams were welded manually by workers, so the welding are not able keep the same for all products, meaning that there is a possibility some of the beams were not welded as good as others. By using welding machines, all beams will be welded the same. It improved product quality, and at the same time, reduce costs as less labors required.

Necessary inspection, maintenance and repair of warehouse racks periodically

toco — Thu, 18 Aug 2016 07:00:19 +0000

Damaged racking or missing parts can result in wrecked stock and/or injured staff. Therefore it is important to have your racks inspected periodically to avoid such risks. Normally you would ask a professional company to do it or you can check it on your own. The operators would report if they find any damages during their work.

Pallet Rack Maintenance Frame Inspection

Columns
– Check the front and rear column of each upright for any damage due to pallet loading or forklifts
– Review for any twisting of the frame column
Bracing – Horizontals & Diagonals
– Inspect for any bent or missing horizontals and diagonals
– Check for broken welds
– Inspect that anchors are secured to the baseplate (typically two anchors per upright baseplate is recommended)
– Inspect for missing, or loose sheared anchors
Pallet Rack Cross Beam Inspection
– Check all beam to frame connections for missing safety clips or bolts
– Inspect for frontal damage or any downward impact
– Inspect for any bowing, bending, bent or twisted cross beams
Pallet Rack Wire Deck Safety Inspection
– Review each beam level for uniformily distributed pallet loads
– Inspect for any breaks in the welds on the mesh decking
– Inspect for any bowing or bending in the mesh
Pallet Rack Accessory Inspection
– Inspect that anchors are secured to the baseplate
– Inspect for any breaks in the welds

Pallet Rack Systems Maintenance

Drive In Rack
Broken down into Rails and Horizontal & Vertical Bolted Bracing
-Rails: Inspect for any rail deformation, plumpness of rail, any broken welds between arm and rail, and any loose or missing hardware
-Horizontal (Rail Diagonal) & Vertical (Back Diagonal) Bolted Bracing: Inspect for any bent or missing bracing, and any loose or missing hardware

Push Back Rack
Broken down into Push Back Rails and Push Back Carts
-Push Back Rails: Inspect alignment of rails, for any broken welds, for missing or loose hardware, and rails for debris and clean as required
-Push Back Carts: Inspect the alignment of carts, the flow carts, wheels to be replaced, for any loose or broken welds, and for any loose or missing hardware.

WHY THE GOODS ALWAYS COMES WITH DAMAGES

toco — Thu, 18 Aug 2016 06:45:40 +0000

Customers always complained the racks were arrived with damages, scratches, or even collapsed in the container which makes difficult to unload them.

It is important to know that package and loading skills are key points as part of the quality. Some customers alway seek lowest prices but just forget these aspects that the manufacturers easily forget to do.

TOCO pays attention to the small details that give our customers more confidence in our quality!

HOT GALV. CANTILEVER RACKING – HEAVY DUTY

toco — Fri, 24 Jul 2015 04:38:39 +0000

Recently we supplied one container of cantilever racking to the customer in Queensland AU. Specially the cantilever rackings were made with hot dipped galvanization to meet customer’s outdoor use requirement.

Project Description

Single Rows: 2
Size: H4800 x D1200 x L24500
Capacity: 1000kg/arm
3 Storage Levels

Double Rows: 3
Size: H4800 x D2700 x L24500
Capacity: 1000kg/arm
3 Storage Levels

TOCO CEMAT SHANGHAI 2016

toco — Sun, 19 Jul 2015 07:41:37 +0000

TOCO will be in CEMAT Shanghai 2016 to present storage equipment. 1 – 4 Nov 2016. Welcome you visit our booth and discuss there! Booth No W2-G9.

TOCO STORAGE

Galvanized Pallet Racking to NZ ready for shipment

Metal Pallet, Plastic Pallet, Wood Pallet, Which one to choose?

Safety

Repair

With ASRS Equipment

Design Flexibility

Cleanliness

Fire

Climate